Preox/Aramid

Our heat protection garments made of Preox/Aramid from Tempex offer multiple protective properties, most of them in the highest certification class, combined with a very low fabric weight. The material composition only weights 370 g/m². Jacket, trousers, bib and foundry coat offer the best possible protection against Iron and Aluminium liquid splashes according to EN 11612 (D3, E3) as well as very good protection against radiant heat (C2).

The Preox and Aramid fibres used in our CK-10/Z are tried and tested materials. The heat transfer protection effect is enhanced by the high-vacuum metallization surface.

 

CK-10/Z | 70% Preox, 30% Aramide | Herringbone twill

ca. 370 g/m²

  • Vacuum metallisation
  • Light
  • Good protection against molten metals

Please note: Every PPE garment certified according to DIN EN ISO 11612 is part of a protective clothing system in combination with heat protective under wear worn below of the outerwear. The protective function is only ensured for the parts of the body that are covered by the protective clothing. Additional protective clothing always has to be worn in combination with a suit according to DIN EN ISO 11612. DIN EN ISO 11612 defines a suit as clothing that consists of two components – jacket/coat and trousers.

A clothing system (suit plus additional protective clothing) according to DIN EN ISO 11612 consists of:: 

- Coat / Jacket
- Trousers
- Apron
- Head and face protection
- Cuffs
- Gaiters

Every garment is required to be worn in combination with each other. 

Foundry Coat

Set-in sleeve with pivot spacing; Ventilation eyelets under the arms; Inner collar with flame-retardant cotton lining; Front Velcro fastener FR; Approx. 130 cm long.

Part number 12004 4H000 001 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
Colours silver
Standards
Products of this collection
Foundry Coat
Jacket Quick Release
Trousers
Apron with Sleeves

Heat Protection Jacket with Quick Release Fastener

Set-in sleeve with pivot spacing; Ventilation eyelets under the arms; Inner collar with flame-retardant cotton lining; Front closure with 3 quick release clasps; Approx. 80 cm long.

Part number 12004 1H003 000 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
Colours silver
Standards
Products of this collection
Foundry Coat
Jacket Quick Release
Trousers
Apron with Sleeves

Heat Protection Trousers

Sewn-in adjustable suspenders; Covered zip fly with snap fastener closure.

Part number 12004 2H003 000 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
Colours silver
Standards
Products of this collection
Foundry Coat
Jacket Quick Release
Trousers
Apron with Sleeves

Apron with Sleeves

Shoulder protection; Neckline treated with molleton; Set-in sleeves; Back protection closable using snap fasteners; Brass chain as a side fastener; Chains and hook fasteners with underlaid leather; Opening on the back with covered snap fastener closure; Approx. 130 cm long; Arm length approx. 60 cm; Back protection approx. 16 cm long; Approx. 100 cm wide.

Part number 12004 7H010 005 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
Colours silver
Standards
Products of this collection
Foundry Coat
Jacket Quick Release
Trousers
Apron with Sleeves