Preox/Aramid plus contact heat

Our CK-11/Z foundry coat from Tempex offers a wide range of high protection properties. At the same time, CK-11/Z has a low fabric weight of only 490 g/m² yet the material is certified according to the highest demands of the EN 11612 standard concerning liquid Iron and Aluminium splashes (D3, E3) along with excellent protection against radiant heat (C3). In comparison with CK-10/Z, it provides additional protection against contact heat.

The Preox and Aramid fibres used in our CK-11/Z are tried and tested materials. The heat transfer protection effect is enhanced by the high-vacuum metallization surface.

 

CK-11/Z | 70% Polyacrylic 30% Aramide | Herringbone twill

ca. 490 g/m²

  • Vacuum metallisation
  • Very good protection against molten metals

Steel works, aluminium working industry, foundries, heat exposed works. 

Please note: Every PPE garment certified according to DIN EN ISO 11612 is part of a protective clothing system in combination with heat protective under wear worn below of the outerwear. The protective function is only ensured for the parts of the body that are covered by the protective clothing. Additional protective clothing always has to be worn in combination with a suit according to DIN EN ISO 11612. DIN EN ISO 11612 defines a suit as clothing that consists of two components – jacket/coat and trousers.

A clothing system (suit plus additional protective clothing) according to DIN EN ISO 11612 consists of:: 

- Coat / Jacket
- Trousers
- Apron
- Head and face protection
- Cuffs
- Gaiters

Every garment is required to be worn in combination with each other. 

Foundry Coat

Set-in sleeve with pivot spacing; Ventilation eyelets under the arms; Inner collar with flame-retardant cotton lining; Front Velcro fastener FR; Approx. 130 cm long.

Part number 12005 4H000 001 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
Colours silver
Standards
Products of this collection
Foundry Coat