CK-1/Z

Our heat protection garments made of Preox/Aramid from Tempex offer multiple protective properties. The Preox and Aramid fibres used in our CK-1/Z are tried and tested materials. The heat transfer protection effect is enhanced by the high-vacuum metallization surface.

 

CK-1/Z | 30% Preox, 70% Aramide | Herringbone twill

Herringbone twill; high-vacuum metallisation; very good protection against molten metals.

Please note: Every PPE garment certified according to DIN EN ISO 11612 is part of a protective clothing system in combination with heat protective under wear worn below of the outerwear. The protective function is only ensured for the parts of the body that are covered by the protective clothing. Additional protective clothing always has to be worn in combination with a suit according to DIN EN ISO 11612. DIN EN ISO 11612 defines a suit as clothing that consists of two components – jacket/coat and trousers. A clothing system (suit plus additional protective clothing) according to DIN EN ISO 11612 consists of: Coat / Jacket, Trousers, Apron, Head and face protection, Cuffs, Gaiters. Every garment is required to be worn in combination with each other. 

Foundry Coat

Set-in sleeve with pivot spacing; Ventilation eyelets under the arms; Inner collar with flame-retardant cotton lining; Front Velcro fastener FR; Approx. 130 cm long.

Part number 07 4H000 000 15
Regular sizes
Secondary sizes
46/48, 58/60
42/44 & 62/64
Colours silver
Garment weight ca. 1.790 g
Standards
Products of this collection
Foundry Coat
Jacket Quick-Release

Heat Protection Jacket with Quick Release Fastener

Set-in sleeve with pivot spacing; Ventilation eyelets under the arms; Inner collar with flame-retardant cotton lining; Front closure with 3 quick release clasps; Approx. 80 cm long.

Part number 12007 1H003 000 15
Regular sizes
Secondary sizes
46/48, 58/60
42/44 & 62/64
Colours silver
Garment weight ca. 1.280 g
Standards
Products of this collection
Foundry Coat
Jacket Quick-Release