Splash and welding protection

There are high demands made on the protective function of PPE garments when resistance to temperatures as well as molten metal is required. The Tempex FMP collections offer an excellent protection against liquid iron splashes (highest protection class E3), very good against liquid aluminium splashes (D2) as well as against contact heat (F1).

The fabric is permanently flame retardant and its protection qualities will remain even after many washings if cared for correctly. Besides its excellent protective properties, FMP also has a very low weight along with a very comfortable material composition. Thanks to the cotton/modacrylic/viscose blend, it is very comfortable to wear with a good humidity management.

FMP is available with a fabric weight of 430 g/m² and also in a lower variant with a fabric weight of 340 g/m². Garments made of FMP 43 have class 2 welding protection whereas FMP 34 has class 1. Both are suited for use in steel works, foundries and aluminium works.

 

FMP 43 | 50% Cotton, 40% Modacrylic, 10% Viscose FR

ca. 430 g/m²

Metal Splash Protection

Jacket 2-coloured

Turn-down collar; Set-in sleeve with pivot spacing; Left-side breast pocket; Front pockets; Sleeve width adjustable by snap fasteners; Covered front closure with snap fasteners; Standard pictograms as embroidery on left sleeve; Manufactured in roof tile design; Approx. 80 cm long.

Part number 01153 1H000 004 2040
Regular sizes
Secondary sizes
46-58, 94-110
44, 60-64, 24-29
Colours navy/red
Standards
Products of this collection
Jacket 2-coloured
Trousers 2-coloured
Dungarees 2-coloured
Jacket 1-coloured
Trousers 1-coloured
Dungarees 1-coloured
Foundry Shirt

Trousers 2-coloured

Side pockets; Covered front closure with snap fasteners; 2 ruler pockets; 2 back pockets.

Part number 01153 2H001 002 2040
Regular sizes
Secondary sizes
46-58, 94-110
44, 60-64, 24-29
Colours navy/red
Standards
Products of this collection
Jacket 2-coloured
Trousers 2-coloured
Dungarees 2-coloured
Jacket 1-coloured
Trousers 1-coloured
Dungarees 1-coloured
Foundry Shirt

Dungarees 2-coloured

Adjustable braces; Bib pocket; Size-adjustable hip width; Side pockets; Covered front closure with snap fasteners; 2 ruler pockets; 2 back pockets; Manufactured in roof tile design.

Part number 01153 5H000 005 2040
Regular sizes
Secondary sizes
46-58, 94-110
44, 60-64, 24-29
Colours navy/red
Standards
Products of this collection
Jacket 2-coloured
Trousers 2-coloured
Dungarees 2-coloured
Jacket 1-coloured
Trousers 1-coloured
Dungarees 1-coloured
Foundry Shirt

Jacket 1-coloured

Turn-down collar; Set-in sleeve with pivot spacing; Left-side breast pocket; Right-side front pocket; Covered front closure with snap fasteners; Standard pictograms as embroidery on left sleeve; Manufactured in roof tile design; Approx. 80 cm long.

Part number 01153 1H000 002 45
Regular sizes
Secondary sizes
46-58, 94-110
44, 60-64, 24-29
Colours navy
Standards
Products of this collection
Jacket 2-coloured
Trousers 2-coloured
Dungarees 2-coloured
Jacket 1-coloured
Trousers 1-coloured
Dungarees 1-coloured
Foundry Shirt

Trousers 1-coloured

Side pockets; Covered front closure with snap fasteners; Right-side ruler pocket; Right-side back pocket.

Part number 01153 2H000 000 45
Regular sizes
Secondary sizes
46-58, 94-110
44, 60-64, 24-29
Colours navy
Standards
Products of this collection
Jacket 2-coloured
Trousers 2-coloured
Dungarees 2-coloured
Jacket 1-coloured
Trousers 1-coloured
Dungarees 1-coloured
Foundry Shirt

Dungarees 1-coloured

Adjustable braces; Bib pocket; Size-adjustable hip width; Side pockets; Covered front closure with snap fasteners; Right-side ruler pocket; Right-side back pocket; Manufactured in roof tile design.

Part number 01153 5H000 001 45
Regular sizes
Secondary sizes
46-58
44, 60-64, 24-29
Colours navy
Standards
Products of this collection
Jacket 2-coloured
Trousers 2-coloured
Dungarees 2-coloured
Jacket 1-coloured
Trousers 1-coloured
Dungarees 1-coloured
Foundry Shirt

Foundry Shirt

Turn-down collar; Left-side breast pocket; Covered front closure with snap fasteners; Sleeve width adjustable using snap fasteners; Standard pictograms as embroidery on left sleeve; Approx. 80 cm long; Manufactured in roof tile design.

Part number 01153 6H000 001 45
Regular sizes
Secondary sizes
46-58
44, 60-64
Colours navy
Standards
Products of this collection
Jacket 2-coloured
Trousers 2-coloured
Dungarees 2-coloured
Jacket 1-coloured
Trousers 1-coloured
Dungarees 1-coloured
Foundry Shirt