100 % Aramid aprons

Aramid is a reliable heat shield, and it is extremely resistant to abrasion. We offer the complete working outfit from head to toe made of KF-Z/3: protective hood, jacket, trousers, apron, foundry coat and even boots – the full product range for workers in front of the blast furnace.

Among the protective properties are an excellent protection against radiant heat (C3) and protection against large liquid Iron and Aluminium splashes according to the highest certification class (D3 und E3). The hat protection effect is being reinforced by the applied high-vacuum metallization.

Additionally Aramid is very robust. Thanks to this all our heat protection garments made of KF-3/Z from Tempex strongly resist to mechanical load.

The material has a weight of 500 g/m², which means a medium weight. If you need a more heavy material composition that, for example, offers a higher protection against radiant heat (C4) please watch RF-1/Y.

 

KF-3/Z | 100% Aramide | Herringbone twill

ca. 500 g/m²

  • Vacuum metallisation
  • Very good protection against molten metals

Please note: Every PPE garment certified according to DIN EN ISO 11612 is part of a protective clothing system in combination with heat protective under wear worn below of the outerwear. The protective function is only ensured for the parts of the body that are covered by the protective clothing. Additional protective clothing always has to be worn in combination with a suit according to DIN EN ISO 11612. DIN EN ISO 11612 defines a suit as clothing that consists of two components – jacket/coat and trousers.

A clothing system (suit plus additional protective clothing) according to DIN EN ISO 11612 consists of:: 

- Coat / Jacket
- Trousers
- Apron
- Head and face protection
- Cuffs
- Gaiters

Every garment is required to be worn in combination with each other. 

Apron with Sleeves

Shoulder protection; Neckline treated with molleton; Set-in sleeves; Back protection closable using snap fasteners; Brass chain as a side fastener; Chains and hook fasteners with underlaid leather; Opening on the back with covered snap fastener closure; Approx. 130 cm long; Arm length approx. 60 cm; Back protection approx. 16 cm long; Approx. 100 cm wide.

Part number 12003 7H010 000 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
Colours silver
Standards
Products of this collection
Apron with Sleeves
Bib Apron
Half Apron

Bib Apron

Neck strap; Tie straps for closing; Approx. 130 cm long.

Part number 12003 7H011 000 15
Regular sizes One size
Colours silver
Standards
Products of this collection
Apron with Sleeves
Bib Apron
Half Apron

Half Apron

Tie straps for closing; Approx. 100 cm long.

Part number 12003 7H012 000 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
Colours silver
Standards
Products of this collection
Apron with Sleeves
Bib Apron
Half Apron