Polyacrylic/Aramide plus contact heat

Our CK-11/Z foundry coat from Tempex offers a wide range of high protection properties. At the same time, CK-11/Z has a low fabric weight of only 490 g/m² yet the material is certified according to the highest demands of the EN 11612 standard concerning liquid Iron and Aluminium splashes (D3, E3) along with excellent protection against radiant heat (C3). In comparison with CK-10/Z, it provides additional protection against contact heat.

The Polyacrylic and Aramide fibres used in our CK-11/Z are tried and tested materials. The heat transfer protection effect is enhanced by the high-vacuum metallization surface.


CK-11/Z | 70% Polyacrylic 30% Aramide | Herringbone twill

ca. 490 g/m²

  • Vacuum metallisation
  • Very good protection against molten metals

Steel works, aluminium working industry, foundries, heat exposed works. 

Foundry Coat

Set-in sleeve with pivot spacing; Ventilation eyelets under the arms; Inner collar with flame-retardant cotton lining; Front Velcro fastener FR; Approx. 130 cm long.

Part number12005 4H000 001 15
Regular sizes
Secondary sizes
46/48 to 58/60
42/44 and 62/64
ColoursFarbpiktogramm silber – Schutzbekleidung von HB silver
Products of this collection
Foundry Coat